CD4027BME4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 24MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 45 ns |
| Logic Function | AND, Flip-Flop |
| Logic IC Type | J-K FLIP-FLOP |
| High Level Output Current | -4.2mA |
| Low Level Output Current | 6.8mA |
| Power Supply Current-Max (ICC) | 0.06mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4027BME4 Overview
SOICis the way it is packaged. There are 2 elements in it. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Power is provided by a 5V supply. There is an electronic part that is mounted in the way of Surface Mount. 16pins are included in its design. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. The flip flop is designed with 2bits. On the basis of its reliable performance, this D flip flop is well suited for use with TUBE. In order to operate, the chip has 1 output lines. In terms of quiescent current, it consumes 20μA . There is -4.2mA output current at the high level. A 6.8mAvalue is set for low-level output current. Ideally, the operating temperature should be below 125°C. A temperature above -55°Cshould be used for the operation. The system operates with a minimum supply voltage of 3V. It supports a maximum supply voltage of 18V volts. A frequency of 24MHzcan be achieved. The logic IC it adopts is J-K FLIP-FLOP. Currently, it is equipped with 2 functions . 16pins are available on this JK flip flop.
CD4027BME4 Features
16 pins
2 Bits
2 Functions
16 pin count
CD4027BME4 Applications
There are a lot of Texas Instruments CD4027BME4 Flip Flops applications.
- ATE
- Matched Rise and Fall
- Latch
- Reduced system switching noise
- Asynchronous counter
- Data Synchronizers
- ESD protection
- Shift Registers
- Computers
- Balanced 24 mA output drivers