CD40194BEE4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Propagation Delay | 140 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 440 ns |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| fmax-Min | 8 MHz |
| Max Frequency@Nom-Sup | 3000000Hz |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD40194BEE4 Overview
There is an embedded device in the package PDIP. 16 is the sum of the number of terminations in the chip. The part's operating supply voltage is rated 5V. A total of 1 elements can be found on this part. In this device, there are 16 pins. Through Hole is recommended for mounting. It is noted that this chip uses an operating supply voltage of 15V. There are a total of 16 pins on it. Under 125°C, it is recommended that it be used. Ideally, it should not fall below -55°C. 18V is the supply voltage used. A voltage higher than 3V is used as a supply voltage. There is a quiescent current of 100μA running through it.
CD40194BEE4 Features
With 16 pins
Operate supply voltage at 15V
Quiescent Current at 100μA
CD40194BEE4 Applications
There are a lot of Texas Instruments CD40194BEE4 Shift Registers applications.
- LED matrix control
- Output expansion
- Pseudo Random Pattern Generator
- Serial-to-parallel data conversion
- Generate time delay toward digital circuits
- Counter
- Data Processors
- store data in digital form
- Flash Memory
- Serial to parallel converter