Parameters |
Contact Plating |
Gold |
Mount |
Surface Mount |
Package / Case |
TSSOP |
Number of Pins |
16 |
Weight |
61.887009mg |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
16 |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Pin Count |
16 |
Operating Supply Voltage |
15V |
Number of Elements |
2 |
Temperature Grade |
MILITARY |
Max Supply Voltage |
18V |
Min Supply Voltage |
3V |
Propagation Delay |
120 ns |
Quiescent Current |
100μA |
Turn On Delay Time |
400 ns |
Logic Function |
Shift Register |
Direction |
Unidirectional |
Output Polarity |
TRUE |
Logic IC Type |
SERIAL IN PARALLEL OUT |
Number of Bits per Element |
4 |
Trigger Type |
POSITIVE EDGE |
Number of Input Lines |
1 |
fmax-Min |
8.5 MHz |
Height |
1.15mm |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
CD4015BPWRG4 Overview
As a result, TSSOP package contains the embedded device. A total of 16 terminations can be found on the chip. The part's operating supply voltage is rated 5V. The part consists of 2 elements. There are 16 pins on the device. It is recommended that the mount should be done by Surface Mount. In terms of supply voltage, this chip operates within the range of 15V. 1 input lines are available on the device. The total number of pins is 16. Under 125°C, it is recommended that it be used. In order for this device to function, the value should not be less than -55°C. It is used under the 18V supply voltage. It is important to note that this supply voltage is higher than 3V. There is a quiescent current of 100μA running through it.
CD4015BPWRG4 Features
With 16 pins
Operate supply voltage at 15V
Quiescent Current at 100μA
CD4015BPWRG4 Applications
There are a lot of Texas Instruments CD4015BPWRG4 Shift Registers applications.
- Data Processors
- Data manipulation
- Parallel data
- temporary data storage
- Output expansion
- Serial-to-parallel data conversion
- Delay Line
- Counter
- Remote control holding register
- data manipulation