CD4014BPWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER; ALSO OPERATES AS SISO |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Number of Bits | 8 |
| Propagation Delay | 120 ns |
| Turn On Delay Time | 320 ns |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Number of Output Lines | 3 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD4014BPWE4 Overview
There is an embedded device in the package TSSOP. 16 is the total number of terminations on the chip. This item is packed in case Rail/Tube. The part operates at 5V voltage. The device is equipped with 16 pins. Mounting by Surface Mount is recommended. It's noted that the chip's operating supply voltage is in the range 15V. The following additional aspects of this section are worth noting: OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER; ALSO OPERATES AS SISO. This device has 9 input lines available. IC chip bits total 8. This board has 16 pins in total. The product should be used at temperatures below 125°C. In order for this device to function, the value should not be less than -55°C. 18V is the supply voltage used. This supply voltage is employed higher than 3V. A total of 3 output lines are available for operation. The subcategory in which it falls belongs to is Shift Registers. There are 1 circuits in this device.
CD4014BPWE4 Features
With 16 pins
Operate supply voltage at 15V
With 3 output lines
CD4014BPWE4 Applications
There are a lot of Texas Instruments CD4014BPWE4 Shift Registers applications.
- Parallel to serial converter
- LED matrix control
- Generate time delay toward digital circuits
- Delay Line
- data transfer
- 7-segment display control
- Pattern Recognizers
- Flash Memory
- ROM Chips
- temporary data storage