CAS 15-NP
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Through Hole |
| Package / Case | Module |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2004 |
| Series | CAS |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 10 |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | UNSPECIFIED |
| Terminal Form | PIN/PEG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 300kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 20mA |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Polarization | Bidirectional |
| Accuracy | ±0.8% |
| Response Time | 0.3μs |
| Sensor Type | Flux Gate, Closed Loop |
| Linearity | ±1% |
| Sensitivity | 41.67mV/A |
| For Measuring | AC/DC |
| Current - Sensing | 15A |
| RoHS Status | RoHS Compliant |
CAS 15-NP Overview
As a safety precaution, current sensors are placed in Module packages. The devices are protected from damage by the Tray package. Ideally, these current sensors should supply a maximum current of 20mA. There are no terminations on the current sensors. A current sensor can supply voltage of 5V while working. It is recommended that current sensors supply a minimum voltage of 4.75V. Nevertheless, the voltage supplied by current sensors should not exceed 5.25V.
CAS 15-NP Features
Moisture Sensitivity Level: Not Applicable
Operating Temperature: -40°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Flux Gate, Closed Loop
Supply Voltage: 4.75V~5.25V
Frequency: 300kHz
Sensing Current: 15A
Module Package
CAS 15-NP Applications
There are a lot of LEM USA Inc. CAS 15-NP Current Sensors applications.
- Mobile applications
- Frequency, Voltage, and Solar Inverters
- Battery supplied applications
- Uninterruptible Power Supplies(UPS)
- Power supply management
- Static converters for for DC motor drives
- AC variabel speed drives and servo motor drives
- Power factor correction
- Inverter and H-bridge current measurements
- Proving Switch