BU4094BCF-E2
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN COPPER |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | COMPLIMENTARY SERIAL OUTPUT ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 10 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 270 ns |
| Turn On Delay Time | 840 ns |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 1 |
| Number of Output Lines | 10 |
| fmax-Min | 3 MHz |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BU4094BCF-E2 Overview
SOP package contains the device. The number of the chip's terminations sums up to 16. The Tape & Reel (TR) case contains it. A voltage of 5V is specified for the part's operating supply. In this device, there are 16 pins. Surface Mount is recommended for mounting. It is noted that this chip uses an operating supply voltage of 15V. Additionally, this section contains the following: COMPLIMENTARY SERIAL OUTPUT ALSO AVAILABLE. As far as the device is concerned, there are 1 input lines available. It has a total of 8 pins. It has a total of 16 pins. A temperature below 85°C is recommended for its use. For this device to work, it should not go below -40°C. Under 18V, this supply voltage is employed. There is a voltage applied to the supply that is greater than 3V. Operation is available on only 10 output lines. It belongs to the Shift Registers subcategory.
BU4094BCF-E2 Features
With 16 pins
Operate supply voltage at 15V
With 10 output lines
BU4094BCF-E2 Applications
There are a lot of ROHM Semiconductor BU4094BCF-E2 Shift Registers applications.
- Serial-to-parallel data conversion
- Counter
- Parallel data
- Sequence generator
- Flash Memory
- Interconnectors
- Parallel to serial converter
- Remote control holding register
- 7-segment display control
- LED matrix control