BPW34FA
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Contact Plating | Tin |
| Mount | PCB, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 2-DIP (0.213, 5.40mm) |
| Number of Pins | 2 |
| Operating Temperature | -40°C~100°C |
| Packaging | Bulk |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 150mW |
| Polarity | Reverse |
| Diode Type | PIN |
| Power Dissipation | 150mW |
| Viewing Angle | 120° |
| Forward Current | 100mA |
| Response Time | 20ns |
| Voltage - DC Reverse (Vr) (Max) | 16V |
| Rise Time | 20ns |
| Forward Voltage | 1.3V |
| Fall Time (Typ) | 20 ns |
| Max Reverse Voltage (DC) | 16V |
| Reverse Breakdown Voltage | 32V |
| Wavelength | 880nm |
| Peak Wavelength | 850 nm |
| Reverse Voltage (DC) | 16V |
| Dark Current | 2nA |
| Spectral Range | 730nm ~ 1100nm |
| Active Area | 7mm2 |
| Current - Dark (Typ) | 2nA |
| Height | 2.2mm |
| Length | 4.5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
BPW34FA Overview
Photodiodes are enclosed in Bulk to prevent damage. In order to ensure safety, the photodiodes are packaged in 2-DIP (0.213, 5.40mm) packages. Continually operating in reverse-bias mode, a photodiode's maximum voltage is 16V. It is recommended that the photodiodes are maintained at a constant voltage of 16V in reverse-bias mode. Pins 2 are present on the photodiodes. A circuit made up of photodiodes could release heat 150mW. It is recommended that photodiodes be operated at a temperature of 100°C. The minimum operating temperature for the photodiodes, however, should be set to -40°C. It is recommended that the reverse anode voltage on the photodiodes be 32V. A circuit should experience a maximum heat release of 150mW when photodiodes are used. In the DC circuit, the photodiodes can function properly with a reverse voltage of 16V. For a photodiode to operate, a voltage of 1.3V is required. Without light input, a photodiode will produce 2nA current.
BPW34FA Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Bulk
Diode Type: PIN
Mount: PCB, Through Hole
Spectral Range: 730nm ~ 1100nm
Response Time: 20ns
Viewing Angle: 120°
BPW34FA Applications
There are a lot of OSRAM Opto Semiconductors Inc. BPW34FA Photodiodes applications.
- Pulse Oximetry
- High speed photo detectors
- Sterilization Lamp Monitoring
- Pure UV-C Monitoring
- Shaft encoders
- Medical and Industrial
- Infrared data transmission
- YAG laser detection
- Solar Cells
- Infrared remote control