ATF1504AS-10AU44
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | ATF15xx |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | POWER -UP RESET; SECURITY FUSE |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATF1504AS |
| Number of Outputs | 32 |
| Operating Supply Voltage | 5V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 130mA |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 1500 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 40 |
| Height | 1.05mm |
| Length | 10.1mm |
| Width | 10.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATF1504AS-10AU44 Overview
There are 64 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is enclosed in a 44-TQFP package.This device has 32 I/O ports programmed into it.There is a 44terminations set on devices.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The device is powered by a voltage of 5V volts.As a result, it is packaged as Tray.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.The ATF15xxseries FPGA is one of these types.If you use this device, you will also find [0].There are related parts in [0].It is possible to construct digital circuits using 1500gates, which are devices that serve as building blocks.If high efficiency is to be achieved, the supply voltage should be maintained at [0].Data storage is performed using [0].The electronic component is mounted by Surface Mount.The device has a pinout of [0].A voltage of 5.5V is the maximum supply voltage for this device.The device is designed to operate with a minimal supply voltage of 4.5VV.A frequency of 125MHzcan be achieved.It consists of 4 logic blocks (LABs).This device is configured to output [0].The product is equipped with 40 product terms.
ATF1504AS-10AU44 Features
44-TQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
44 pins
4 logic blocks (LABs)
32 outputs
ATF1504AS-10AU44 Applications
There are a lot of Microchip Technology ATF1504AS-10AU44 CPLDs applications.
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Programmable polarity
- Custom shift registers
- Programmable power management
- Digital systems
- USB Bus
- Handheld digital devices
- Auxiliary Power Supply Isolated and Non-isolated
- D/T registers and latches
- Wide Vin Industrial low power SMPS