APX823-23W5G-7
| Parameters | |
|---|---|
| Reset Delay Time | 280 ms |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 19 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | APX823 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 40μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 500mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.25V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.2V |
| Max Reset Threshold Voltage | 2.3V |
| Undervoltage Threshold | 2.2V |
| Overvoltage Threshold | 2.3V |
| Number of Monitored Inputs | 1 |
APX823-23W5G-7 Overview
There are 5 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. IC management is packaged as a SC-74A, SOT-753 package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. The package peak reflow temperature is specified to be 260. The power management is mounted by a Surface Mount-axis. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 5 pins on the board. 5 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supervisor's supply current is specified to 40μA. A similar IC managements number of the manufacturer can always be found by using APX823, the base power ics number. A maximum supply temperature of 40μA can be used with this power management. In total, there are 1 inputs on the power management that can be monitored.
APX823-23W5G-7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
40μA operating supply current
APX823-23W5G-7 Applications
There are a lot of Diodes Incorporated APX823-23W5G-7 Voltage Supervisors applications.
- Fire equipment power monitoring system
- Unattended substation automation
- Medical-specific insulation monitor
- Analog circuit
- Radar
- Magnetic resonance imaging
- Power communication system
- Power distribution systems of infant care room
- Solar power charger
- Utility meter