AP393NL-U
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Comparator |
| Max Power Dissipation | 780mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Output Type | TTL |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1mA |
| Power Dissipation | 780mW |
| Output Current | 16mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 15V |
| Input Bias Current | 250nA |
| Height | 3.5mm |
| Length | 9.53mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP393NL-U Overview
In order to facilitate transportation, it is packaged in PDIP .The comparator has a TTL output.This package has been designed with Tube .The comparator has 8 terminals.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .This is a typical comparator of type General Purpose .The device contains 8 pins.This comparator has 8 pins.There is a quiescent current of 2.5mA in this comparator.The PCB or other board has a Through Hole for mounting.Normal operation of the device requires 1mA supply current.In accordance with the voltage formula, the part's voltage gain is 106.02dB .An increase in temperature over 70°C is not recommended.Comparator electronics cannot be used at a temperature below 0°C .In the comparator, the maximum supply voltage is 36V .The comparator is capable of operating at a minimum supply voltage of 2V .The output quality is maintained by the cooperation of 2 channels.
AP393NL-U Features
TTL output capability
General Purpose IC
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
AP393NL-U Applications
There are a lot of Diodes Incorporated AP393NL-U linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Metering Systems
- Current and voltage sensing
- Zero-Crossing Detectors
- Simple Analog-to-Digital Converters (ADCs)
- Window Comparators, Multivibrators
- Zero-Crossing Detectors
- Ultra-Low Power Systems
- Mobile Phones
- Mobile Phones and Tablets