AP2810AMM-G1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Feature | Load Discharge, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Interface | On/Off |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 60mOhm |
| RoHS Status | ROHS3 Compliant |
AP2810AMM-G1 Overview
It is packaged in the manner of a Tube.It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package as well.Surface Mount is the mounting type of the LED driver.USB Switch is the switch type it owns.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.By default, it is set to output 1.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Load Discharge, Status Flag.This LED driver has a maximum output of 1AV.
AP2810AMM-G1 Features
AP2810AMM-G1 Applications
There are a lot of Diodes Incorporated AP2810AMM-G1 Power Switches ICs applications.
- Wearable Devices
- Set-top-box
- Hard Disk Drives
- USB Protection
- Wireless Modem Data Cards
- Hot Swap
- USB Ports/Hubs
- Handheld Devices
- Hot Swap
- Solid-State Drives