AP2162SG-13
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 160MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Current Rating | 1.5A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 50 μs |
| Output Peak Current Limit-Nom | 1A |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2162SG-13 Overview
A Tape & Reel (TR) is used to package it.The 8-SOIC (0.154, 3.90mm Width) package includes it.The LED driver is mounted as Surface Mount.The switch type of this switch is USB Switch.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.It has a maximum output voltage of P-Channel volts.There are Status Flag features available on the LED driving board.A total of 8 terminations have been found in it.In order to operate, the 8 pins are used.It contains 2 functions.To comply with the operation criteria, the maximum output current is reduced to 1A.With a supply voltage of 5V, high efficiency is possible.Surface Mount is mounted in the way of this lighting driver.It is equipped with a total of 8 pins.There is 160MOhm resistance on the LED driver.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).This part has a power supply of 3/5V.
AP2162SG-13 Features
Supplied from 5V
Resistance of 160MOhm
AP2162SG-13 Applications
There are a lot of Diodes Incorporated AP2162SG-13 Power Switches ICs applications.
- USB Power Distribution
- Notebook and Tablet Computers
- Portable GPS Device
- HDD and SSD
- Wireless Headsets
- Wireless/Networking Cards
- Wearable Devices
- Hot-Swap Systems
- Low Voltage I/O System Power
- HDD, SSD