AP1681MTR-G1
| Parameters | |
|---|---|
| Factory Lead Time | 19 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | AC DC Offline Switcher |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Number of Outputs | 1 |
| Max Output Current | 300mA |
| Number of Channels | 1 |
| Max Supply Voltage | 21.5V |
| Min Input Voltage | 10.8V |
| Max Input Voltage | 21.5V |
| Min Output Voltage | 8V |
| Internal Switch(s) | No |
| Voltage - Supply (Max) | 21.5V |
| Voltage - Supply (Min) | 10.8V |
| RoHS Status | ROHS3 Compliant |
AP1681MTR-G1 Overview
Board space is saved by its 8-SOIC (0.154, 3.90mm Width) package.LED drivers use 1 outputs for their design.Surface Mount is used to mount the led driver.In this case, the result is a AC DC Offline Switcher with high efficiency.If the led driver ic is set to -40°C~105°C TA, it will work normally.The voltage supply can fail if it is below 10.8V.This is mounted by Surface Mount.A maximum supply voltage of 21.5V is acceptable.Optimally, it provides a voltage value of 21.5V for the maximum supply voltage.A minimal input voltage of 10.8V is required for it to operate.Supply current cannot exceed 21.5V.An operating temperature above 105°C should ensure stable operation.In order to maintain stable operation, a temperature greater than -40°C is essential.Even when operating at a maximal output current of 300mA, it is capable of delivering all the benefits of a LED driver.It maintains a 8V voltage at its minimal output.Transmission is available on 1 channels.
AP1681MTR-G1 Features
Available in the 8-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~105°C TA
AP1681MTR-G1 Applications
There are a lot of Diodes Incorporated AP1681MTR-G1 LED Driver ICs applications.
- Linear fluorescent
- Panel lighting
- A- lamps
- Scanners and Handy Terminals
- Other Electronic Devices
- Constant Voltage Power Source for portable equipment
- Refrigeration lighting
- LED Lightings for Industrial Equipment
- High-end retail lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices