ADG704BRMZ-REEL7
| Parameters | |
|---|---|
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG704 |
| Pin Count | 10 |
| Operating Supply Voltage | 5V |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1nA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 5μW |
| Throw Configuration | 4PST |
| Logic Function | Multiplexer |
| Number of Inputs | 4 |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 6 ns |
| On-State Resistance (Max) | 4Ohm |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 37pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 14ns, 6ns (Typ) |
| Charge Injection | 3pC |
| Crosstalk | -82dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.8V~5V |
| Signal Current-Max | 0.03A |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 16 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 4Ohm |
ADG704BRMZ-REEL7 Overview
Shipping overseas is convenient due to the electrical component's packing in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 4:1. Operational temperature extended around -40°C~85°C TA. There are 10 terminations totally. High-quality output is provided by the electronic component's 4 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. The electronic part body is injected with 10 pins. These analog multiplexers are built based on SP4T switching circuits. 1 circuits are used in this analogue multiplexer. Try searching for ADG704 variants of the analog switch ic. An switch multiplexer with 4Ohm internal resistance has a value of 4Ohm. The datasheets for the 10 pins explain the functions. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 1.8V. This multiplexer would work with 1nA current. Using only a single voltage supply, this analog switch requires 1.8V~5V voltage. The electrical part can be operated at 5V voltage levels. Among the inputs that can be operated are the 4 inputs. 200MHz bandwidths enable data to be transferred.
ADG704BRMZ-REEL7 Features
4 Channels
Switch Circuit: SP4T
1nA Supply Current
Bandwidth: 200MHz
ADG704BRMZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG704BRMZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Automatic test equipment
- Relay replacements
- Sample-and-hold systems
- Audio/video switches
- Microwave transmission systems
- Data switching
- High reliability control systems
- Avionics
- New designs requiring multiplexer functions
- Microprocessor Controlled Analog Systems