ACS725LLCTR-20AB-T
| Parameters | |
|---|---|
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 10mA |
| Polarization | Bidirectional |
| Max Supply Current | 14mA |
| Quiescent Current | 10mA |
| Accuracy | ±0.8% |
| Response Time | 4μs |
| Bandwidth | 120 kHz |
| Coil Resistance | 1.2mOhm |
| Sensor Type | Hall Effect, Differential |
| Linearity | ±1.5% |
| Sensing Method | Hall Effect |
| For Measuring | AC/DC |
| Max Junction Temperature (Tj) | 165°C |
| Ambient Temperature Range High | 150°C |
| Current - Sensing | 20A |
| Sensitivity (mV/A) | 66 mV/A |
| Height | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 16 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | DC~120kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | Ratiometric, Voltage |
ACS725LLCTR-20AB-T Overview
The current sensors are put into 8-SOIC (0.154, 3.90mm Width) packages for safety protection. In order to protect the devices from damage, these current sensors are packaged in the Tape & Reel (TR). Current sensors should supply no more current than 14mA. Current sensors terminate at 8. There are 8 pins in this current sensor. While working, these sensors can supply a voltage of 3.3V. It is recommended that current sensors supply a voltage of 3V as their minimum voltage. It is important that current sensors do not supply voltages exceeding 3.6V. As these components operate, their current should be 10mA.
ACS725LLCTR-20AB-T Features
Moisture Sensitivity Level: 2 (1 Year)
Operating Temperature: -40°C~150°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Differential
Supply Voltage: 3V~3.6V
Frequency: DC~120kHz
Sensing Current: 20A
8-SOIC (0.154, 3.90mm Width) Package
ACS725LLCTR-20AB-T Applications
There are a lot of Allegro MicroSystems ACS725LLCTR-20AB-T Current Sensors applications.
- DC and AC power monitoring
- Static converters for DC motor drives
- Proving Switch
- Closed-L oop DC- and AC-Current Sensor Modules
- Overcurrent Detection
- AC variabel speed drives and servo motor drives
- Inverter and H-bridge current measurements
- Switched Mode Power Supplies(SMPS)
- Frequency, Voltage, and Solar Inverters
- General purpose inverters