AAT4625IKS-T1
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 100MOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Current Rating | 2A |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 60m Ω |
| Turn Off Time | 20 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AAT4625IKS-T1 Overview
Tape & Reel (TR) is the way it's packaged.This package is included in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).There is a switch type of USB Switch.Keeping the temperature at -40°C~85°C TA ensures reliable operation.It is possible to use 1 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.The maximum output voltage of this LED driver is P-Channel volts.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.In total, there are 8 terminations.It contains 1 functions.To meet the operation criteria, the maximum output current drops to 2A.Using a voltage of 5V allows for high efficiency.This LED driver is equipped with a total of 8 pins.Currently, the LED driving board has a resistance of 100MOhm ohms.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).Normal operation requires a voltage above 2.7V for the supply voltage.
AAT4625IKS-T1 Features
Supplied from 5V
Resistance of 100MOhm
AAT4625IKS-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT4625IKS-T1 Power Switches ICs applications.
- HDD, SSD
- Hot Swap
- USB Power Distribution
- USB3.1 Power Delivery
- Smartphone and PDA
- Wireless Headsets
- Portable Video Game Players
- Notebook and Tablet Computers
- Mobile Communication Devices
- Various applications equipped with buttons