AAT4616IPS-1-T1
| Parameters | |
|---|---|
| Factory Lead Time | 11 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 230mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.35W |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.45mm |
| Current Rating | 1.6A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | S-PDSO-N8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 10μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 7 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 10 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.4V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.75A |
| Rds On (Typ) | 130m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 0.85mm |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AAT4616IPS-1-T1 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It is included with the 8-VFDFN Exposed Pad package as well.This LED driving board is mounted using the mounting type Surface Mount.The switch type is General Purpose.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates with a supply voltage of Not Required.Voltage output is P-Channel volts at maximum.Features of the lighting driver are Status Flag.There are 8 terminations in it.It contains 1 functions.It is necessary to reduce the maximum output current to 2A to meet the operation criteria.Using a voltage of 5V allows for high efficiency.230mOhm resistance is present in the lighting driver.As a result, the output current is set to 2A.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.This part has a power supply of 5V volts.The supply voltage should be set at 5.5V for best efficiency.It operates at a maximum current of 10μA.
AAT4616IPS-1-T1 Features
Supplied from 5V
Resistance of 230mOhm
AAT4616IPS-1-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT4616IPS-1-T1 Power Switches ICs applications.
- Low Voltage I/O System Power
- Hot-Swap Systems
- PC Card Hot Swap
- Hard Disk Drives
- Hot Swaps
- Wireless/Networking Cards
- Wearable Devices
- Storage (HDDs, SSDs)
- Portable/Handheld Devices
- Portable GPS Device