A6B273KLWTR
| Parameters | |
|---|---|
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 5.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | NMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 8 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | A6B273 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Strobe, Parallel |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Input Type | Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 150mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 50V Max |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 5.5 Ω |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
A6B273KLWTR Overview
A Tape & Reel (TR) is used to package it.It's included in the 20-SOIC (0.295, 7.50mm Width) package.This LED driving board is mounted using the mounting type Surface Mount.It owns the Latched Driver switch type.The temperature should be set to -40°C~125°C TA to ensure reliable functioning.There are 8 outputs available on this lighting driver.The LED driving board operates at 4.5V~5.5V volts.Voltage output is N-Channel volts at maximum.It is part of the A6B273 family of LED drivers.It has a total of 20 terminations.There are 8 functions of the LED driver.To comply with the operation criteria, the maximum output current is reduced to 500mA.The supply voltage can be 5V for high efficiency.As a result, it is mounted in the manner of Surface Mount.There are 20 pins in total on this board.There is 5.5Ohm resistance on the LED driver.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 4.5V.
A6B273KLWTR Features
Supplied from 5V
Resistance of 5.5Ohm
A6B273KLWTR Applications
There are a lot of Allegro MicroSystems A6B273KLWTR Power Switches ICs applications.
- Storage Drives
- Hot Swap
- Smartphone and PDA
- Wireless Modem Data Cards
- Portable/Handheld Devices
- Gaming
- Hot-Swap Systems
- Set-Top Boxes
- Notebook PC
- PDAs