A6818EEP-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6818 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Number of Outputs | 32 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/560V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 9mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 25mA |
| Ratio - Input:Output | 1:32 |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 32 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 4.57mm |
| Length | 16.59mm |
| Width | 16.59mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6818EEP-T Overview
As a result, it is packaged in the form of a Tube.There is a 44-LCC (J-Lead) package that includes it.It has been mounted as Surface Mount on the LED driver.Latched Driver is the switch type that it owns.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.By default, it is set to output 32.To operate, it needs a supply voltage of 3V~5.5V.A maximum output voltage of Bipolar volts has been specified.This object belongs to the A6818 family.It consists of 44 terminations in total.As far as the lighting driver is concerned, there are 1 functions.In order to meet the operation criteria, the maximum output current drops to 40mA.Using a voltage of 3.3V allows for high efficiency.The LED driving board is mounted in the way of Surface Mount.44 pins are equipped with it.Self-contained LED driver with Display Drivers capacity in an econtainer.There is a voltage supply of 3.3/560V volts on this part.As a result of using this lighting driver, CAN ALSO OPERATE WITH 5V LOGIC SUPPLY can also be produced.
A6818EEP-T Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6818EEP-T Applications
There are a lot of Allegro MicroSystems A6818EEP-T Power Switches ICs applications.
- Telecom and Network Systems
- PC Card Hot Swap
- USB3.1 Power Delivery
- Solid-State Drives
- Notebook PC
- Hot Swap
- Storage (HDDs, SSDs)
- Various applications equipped with buttons
- USB Power Distribution
- Hard Disk Drives