A6277SA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | TIN LEAD |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6277 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 16 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 40mA |
| Output Current | 150mA |
| Voltage - Output | 4V |
| Topology | Shift Register |
| Output Current per Channel | 150mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 10 MHz |
| Number of Segments | 8 |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 5.33mm |
| Length | 25.905mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6277SA Overview
Its 20-DIP (0.300, 7.62mm) package is used to save board space. In LED drivers, the outputs are all set to 8.We are using Through Hole as the mounting method.In this case, it emerges as a Linear with a high efficiency.The LED driver has the capability of operating at a temperature of -40°C~85°C TA.20 terminations are used in its operation.This configuration is built upon 20 pins.The voltage supply can fail if it is below 4.5V.A total of 8 segments have been created.It's mounted on the way to Through Hole.A base part number of A6277 is associated with this LED driver.The voltage of 5.5V is acceptable.Its output voltage is 4V.20 pins are available on the device.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.The maximum efficiency can be achieved by operating it at a minimal voltage of 4.5V.It is possible to supply the load with 150mA current.Powering systems requires 5V voltages.There are currently 16 channels available for transmission.
A6277SA Features
Available in the 20-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~85°C TA
Supply voltage of 5V
Operating with the supply voltage of 5V
A6277SA Applications
There are a lot of Allegro MicroSystems A6277SA LED Driver ICs applications.
- Scanners and Handy Terminals
- Refrigeration lighting
- High-end retail lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED Lightings for Industrial Equipment
- Portable lighting
- Panel lighting
- LED headlights
- Linear fluorescent
- Auxiliary lights for on-vehicle cameras