A2919SLB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES 10V TO 45V VBB SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A2919 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 750mA |
| Supply Current-Max (Isup) | 50mA |
| Voltage - Load | 10V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1/2, 1/4 |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A2919SLB Overview
There is a Bulkpackage included in the design.This part is packed in a 24-SOIC (0.295, 7.50mm Width) case.In most cases, it is recommended to mount the part at Surface Mount.The component connected in General Purposematches it perfectly.A device with a voltage range of 4.75V~5.25V volts is available.Operation temperature ranges from -20°C~150°C TJ.In this case, the motor type is Brushed DC.A total of 24terminations are available in this part.The voltage can applied to the load at the rate of 10V~45V.The amplifier should be set to 5V.Ideally, it should be mounted in the Surface Mountposition.Maintain a current of 750mAfor the part output.The device employs the STEPPER MOTOR CONTROLLER analog IC.Using the A2919part number, it is located.Drivers controllers belongs to Motion Control Electronics series.Additionally, it possesses a characteristic of [0].
A2919SLB Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on A2919 number
Additional Feature: ALSO REQUIRES 10V TO 45V VBB SUPPLY
A2919SLB Applications
There are a lot of Allegro MicroSystems A2919SLB motor drivers applications.
- Display LED backlighting
- Footwell lighting
- General lighting
- Running preventive- maintenance diagnostics
- RGB and monochromatic LED drivers for signage and traffic signals
- Tail lights
- Lighting for health and wellbeing
- Architectural lighting
- PWM generators
- Horticultural applications