74LVTH574D,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVTH574 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 150MHz |
| Family | LVT |
| Current - Quiescent (Iq) | 190μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 5.9ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 5.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 6.6 ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74LVTH574D,118 Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). It is included in the package Tape & Reel (TR). There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. A 2.7V~3.6Vsupply voltage is required for it to operate. In the operating environment, the temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 74LVTH series. In order for it to function properly, its output frequency should not exceed 150MHz. In total, there are 1 elements. There is 190μA quiescent consumption. It has been determined that there have been 20 terminations. The 74LVTH574family includes it. Power is supplied from a voltage of 3.3V volts. Its input capacitance is 4pFfarads. This D flip flop belongs to the family of LVT. This part is included in FF/Latches. It reaches the maximum supply voltage (Vsup) at 3.6V. Keeping the supply voltage (Vsup) above 2.7V is necessary for normal operation. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 3.3V power supplies. This flip flop has a total of 2ports.
74LVTH574D,118 Features
Tape & Reel (TR) package
74LVTH series
3.3V power supplies
74LVTH574D,118 Applications
There are a lot of NXP USA Inc. 74LVTH574D,118 Flip Flops applications.
- Latch-up performance
- Asynchronous counter
- Buffer registers
- Single Up Count-Control Line
- Load Control
- Set-reset capability
- Latch
- Event Detectors
- 2 – Bit synchronous counter
- ESCC