74LVTH374MTCX
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 191mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVTH374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 160MHz |
| Propagation Delay | 5 ns |
| Quiescent Current | 190μA |
| Turn On Delay Time | 4.8 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 4.9ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVTH374MTCX Overview
20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. It is contained within the Tape & Reel (TR)package. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. A 2.7V~3.6Vsupply voltage is required for it to operate. A temperature of -40°C~85°C TAis used in the operation. A flip flop of this type is classified as a D-Type. JK flip flop is a part of the 74LVTHseries of FPGAs. There should be no greater frequency than 160MHzon its output. In total, there are 1 elements. 20terminations have occurred. You can search similar parts based on 74LVTH374. A voltage of 3.3V is used to power it. This T flip flop has a capacitance of 3pF farads at the input. LVTis the family of this D flip flop. Surface Mount mounts this electronic component. The 20pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. 8bits are used in its design. Keeping the supply voltage (Vsup) above 2.7V is necessary for normal operation. Using 8 circuits, it is highly flexible. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. High efficiency requires the supply voltage to be maintained at 3.3V. It is designed with 3 output lines. As a result, it consumes 190μA of quiescent current without being affected by external factors.
74LVTH374MTCX Features
Tape & Reel (TR) package
74LVTH series
20 pins
8 Bits
74LVTH374MTCX Applications
There are a lot of ON Semiconductor 74LVTH374MTCX Flip Flops applications.
- QML qualified product
- Patented noise
- Shift Registers
- Parallel data storage
- Registers
- Balanced Propagation Delays
- Circuit Design
- Differential Individual
- Data storage
- Power down protection