74LVT574DB,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVT574 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 150MHz |
| Family | LVT |
| Current - Quiescent (Iq) | 190μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.032 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 5.9ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 5.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 6.6 ns |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74LVT574DB,118 Overview
The item is packaged in 20-SSOP (0.209, 5.30mm Width)cases. D flip flop is embedded in the Tape & Reel (TR) package. The output it is configured with uses Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of 2.7V~3.6V is required for operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. A flip flop of this type is classified as a D-Type. The 74LVTseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 150MHz. In total, it contains 1 elements. T flip flop consumes 190μA quiescent energy. A total of 20 terminations have been made. You can search similar parts based on 74LVT574. An input voltage of 3.3Vpowers the D latch. This JK flip flop has a 4pFfarad input capacitance. A device of this type belongs to the family of LVT. It is included in FF/Latches. Vsup reaches 3.6V, the maximal supply voltage. Keeping the supply voltage (Vsup) above 2.7V is necessary for normal operation. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. An electrical current of 3.3V volts is applied to it. A D flip flop with 2embedded ports is available. BROADSIDE VERSION OF 374is also one of its characteristics.
74LVT574DB,118 Features
Tape & Reel (TR) package
74LVT series
3.3V power supplies
74LVT574DB,118 Applications
There are a lot of NXP USA Inc. 74LVT574DB,118 Flip Flops applications.
- Data storage
- Data Synchronizers
- Dynamic threshold performance
- Set-reset capability
- Storage registers
- Digital electronics systems
- Buffer registers
- Guaranteed simultaneous switching noise level
- Single Down Count-Control Line
- Computers