74LVT534DB,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVT534 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 150MHz |
| Family | LVT |
| Current - Quiescent (Iq) | 190μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.9ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 5.4 ns |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74LVT534DB,118 Overview
As a result, it is packaged as 20-SSOP (0.209, 5.30mm Width). D flip flop is included in the Tape & Reel (TR)package. Currently, the output is configured to use Tri-State, Inverted. This trigger uses the value Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The supply voltage is set to 2.7V~3.6V. -40°C~85°C TAis the operating temperature. Logic flip flops of this type are classified as D-Type. In this case, it is a type of FPGA belonging to the 74LVT series. There should be no greater frequency than 150MHzon its output. In total, it contains 1 elements. There is 190μA quiescent consumption. A total of 20 terminations have been made. The 74LVT534 family contains it. A voltage of 3.3V is used to power it. Its input capacitance is 4pFfarads. It is a member of the LVTfamily of D flip flop. It is included in FF/Latches. Vsup reaches its maximum value at 3.6V. Normally, the supply voltage (Vsup) should be kept above 2.7V. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. An electrical current of 3.3V volts is applied to it. A total of 2ports are embedded in the D flip flop.
74LVT534DB,118 Features
Tape & Reel (TR) package
74LVT series
3.3V power supplies
74LVT534DB,118 Applications
There are a lot of NXP USA Inc. 74LVT534DB,118 Flip Flops applications.
- Matched Rise and Fall
- Communications
- Test & Measurement
- Divide a clock signal by 2 or 4
- Balanced 24 mA output drivers
- Memory
- Patented noise
- Balanced Propagation Delays
- Event Detectors
- Counters