74LVQ273QSCX
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LSSOP (0.154, 3.90mm Width) |
| Supplier Device Package | 20-QSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVQ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~3.6V |
| Base Part Number | 74LVQ273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 90MHz |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 12mA 12mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
74LVQ273QSCX Overview
It is packaged in the way of 20-LSSOP (0.154, 3.90mm Width). You can find it in the Tape & Reel (TR)package. The output it is configured with uses Non-Inverted. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A 2V~3.6Vsupply voltage is required for it to operate. A temperature of -40°C~85°C TAis used in the operation. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 74LVQ series. Its output frequency should not exceed 90MHz Hz. There are 1 elements in it. There is 40μA quiescent consumption. The 74LVQ273 family contains it. Its input capacitance is 4.5pF farads.
74LVQ273QSCX Features
Tape & Reel (TR) package
74LVQ series
74LVQ273QSCX Applications
There are a lot of ON Semiconductor 74LVQ273QSCX Flip Flops applications.
- Divide a clock signal by 2 or 4
- Frequency Divider circuits
- Power down protection
- Clock pulse
- Pattern generators
- Buffered Clock
- Safety Clamp
- CMOS Process
- Shift registers
- Common Clocks