74LVCH2T45DC,125
| Parameters | |
|---|---|
| Turn On Delay Time | 15.2 ns |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~5.5V |
| Voltage - VCCB | 1.2V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVCH |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVCH2T45 |
| Pin Count | 8 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 5.1 ns |
| Quiescent Current | 8μA |
74LVCH2T45DC,125 Overview
There is an embedded version of it in package 8-VFSOP (0.091, 2.30mm Width).The package is in the form of Tape & Reel (TR).The output it is configured with uses Tri-State, Non-Inverted.Translator type Voltage Level is assigned to this electrical device.Level translators is mounted according to the Surface Mount method.This electrical device has channel type Bidirectional.Operation is performed at -40°C~125°C TA.The superior flexibility of the system is achieved through its use of 1 circuits.Transmission lines are terminated using 8 terminations.According to the base part number 74LVCH2T45, its related parts can be founded.Power comes from a voltage of 1.5V.The device has a pin count of 8.Level translators belongs to the series 74LVCH.8 pins are used in its design.The design of this electronic part contains 2 bits.Supports a voltage of 5.5V as its maximum supply voltage.Level translators operates wLevel translatorsh the minimal supply voltage of 1.2V.From 1.2V~5.5V, the supply rail of the VCCA is configured.1.2V~5.5V is the configuration of the VCCB supply rail.Level translators has been mounted wLevel translatorsh the method of Surface Mount.There are 2 channels.In this case, the logic IC is BUS TRANSCEIVER.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.LVC/LCX/Z is the family name of this electronic device.In the absence of external influences, it consumes 8μA of quiescent current.
74LVCH2T45DC,125 Features
8-VFSOP (0.091, 2.30mm Width) package
1 circuits
8 pin count
74LVCH series
8 pins
74LVCH2T45DC,125 Applications
There are a lot of Nexperia USA Inc. 74LVCH2T45DC,125 voltage translators & level shifters applications.
- Automotive
- Public Signage
- SDIO
- Debouncing a Mechanical Switch
- Extended Product-Change Notification
- Desktop PC
- Handset
- ADAS Fusion
- One Fabrication Site
- Personal computers