74LVC2G53DC,125
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC2G53 |
| Pin Count | 8 |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40μA |
| Power Dissipation | 250mW |
| Propagation Delay | 800 ps |
| Turn On Delay Time | 6.7 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 300MHz |
| Turn-Off Delay Time | 6.8 ns |
| On-State Resistance (Max) | 10Ohm |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 3.8ns, 3.8ns |
| Charge Injection | 7.5pC |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 15Ohm |
| Max Power Dissipation | 250mW |
74LVC2G53DC,125 Overview
As the electronic part is packed in 8-VFSOP (0.091, 2.30mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Surface Mount is where this multiplexer is located. 2:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. Total terminations are 8. This electronic part offers high-quality output due to its 2 channels. When a voltage supply of 2.7V is used, the electronic component should be turned on and run. A total of 8 pins are injected into the body of the electronic part. Circuits based on SPDT switching are used to construct these analog switch ics. A total of 1 circuits make up this switch device. 74LVC2G53 can be used to search for analog multiplexer variants. A 15Ohm internal resistance characterizes this multiplexer. For details about the functions of 8 pins, please refer to the datasheets. Multiplexers should not be powered above 5.5V in normal situations. Single supply type digital switch with a low cost. There should be 1.65V voltage fed to the electrical part below 1.65V. It would be sufficient to run this analogue multiplexer with 40μA current. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. The transfer of data can be performed over 300MHz bandwidths.
74LVC2G53DC,125 Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 300MHz
74LVC2G53DC,125 Applications
There are a lot of Nexperia USA Inc. 74LVC2G53DC,125 Analog Switches & Multiplexers ICs applications.
- Central office
- Fiber to the Home
- Ultrasound
- Medical systems
- Industrial control systems
- Digital access cross connects
- Communication systems
- MP3 players
- Intelligent PBX
- Audio and video signal routing