74LVC1G79GX,125
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFDFN Exposed Pad |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74LVC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.48mm |
| Base Part Number | 74LVC1G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Bits | 1 |
| Max Voltage Rating (DC) | 5.5V |
| Clock Frequency | 500MHz |
| Propagation Delay | 12.5 ns |
| Quiescent Current | 200μA |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 500μA |
| Current - Output High, Low | 32mA 32mA |
| Max Propagation Delay @ V, Max CL | 3.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 200 MHz |
| Max Supply Voltage (DC) | 5.5V |
| Clock Edge Trigger Type | Positive Edge |
| Length | 0.8mm |
| Width | 0.8mm |
| RoHS Status | ROHS3 Compliant |
74LVC1G79GX,125 Overview
In the form of 4-XFDFN Exposed Pad, it has been packaged. You can find it in the Tape & Reel (TR)package. This output is configured with Non-Inverted. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of 1.65V~5.5V volts, it operates. In the operating environment, the temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74LVCseries of FPGAs. This D flip flop should not have a frequency greater than 500MHz. There are 1 elements in it. During its operation, it consumes 500μA quiescent energy. A total of 5 terminations have been made. If you search by 74LVC1G79, you will find similar parts. The power source is powered by 3.3V. There is 5pF input capacitance for this T flip flop. This D flip flop belongs to the family of LVC/LCX/Z. The electronic part is mounted in the way of Surface Mount. 5pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. 1bits are used in its design. 200μAquiescent current consumed.
74LVC1G79GX,125 Features
Tape & Reel (TR) package
74LVC series
5 pins
1 Bits
74LVC1G79GX,125 Applications
There are a lot of Nexperia USA Inc. 74LVC1G79GX,125 Flip Flops applications.
- Counters
- Bounce elimination switch
- Control circuits
- Individual Asynchronous Resets
- Differential Individual
- Dynamic threshold performance
- 2 – Bit synchronous counter
- Count Modes
- Consumer
- Storage Registers