74LVC1G384GV,125
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 15Ohm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC1G384 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 100nA |
| Power Dissipation | 250mW |
| Max Supply Current | 200μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 10 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 7.4 ns |
| -3db Bandwidth | 500MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 500nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 4.2ns, 5ns |
| Charge Injection | 7.5pC |
| Switch-on Time-Max | 8ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC1G384GV,125 Overview
Due to its SC-74A, SOT-753 packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. Total terminations are 5. High-quality output is provided by the electronic component's 1 channels. It is safe to turn on and run the electronic component with a 2.7V voltage supply. 5 pins are injected to the electronic part body. The analog switch ics are built using SPST - NC switching circuits. Use 74LVC1G384 to search for variants of the digital switches. In this multiplexer, the internal resistance is 15Ohm. For details about the functions of 5 pins, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. The lowest voltage the electronic part should receive is 1.65V. It would be sufficient to run this analogue multiplexer with 200μA current. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. A digital multiplexer may suffer damage if voltage is applied above 200μA. There is a voltage range of 5V operating voltages for the electrical part. There are 1 inputs to be operated.
74LVC1G384GV,125 Features
1 Channels
Switch Circuit: SPST - NC
200μA Supply Current
-3db Bandwidth: 500MHz
74LVC1G384GV,125 Applications
There are a lot of Nexperia USA Inc. 74LVC1G384GV,125 Analog Switches & Multiplexers ICs applications.
- Remote Powered Equipment
- High-Voltage
- Video signal routing
- SONET/SDH ADM
- HDTV
- High speed data transmission line cards
- Medical
- Automatic test equipment
- Battery Powered Systems
- Battery Powered Instruments