74LVC1G384GF,132
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 15Ohm |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.35mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC1G384 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 100nA |
| Power Dissipation | 250mW |
| Max Supply Current | 200μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 10 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 7.4 ns |
| -3db Bandwidth | 500MHz |
| On-State Resistance (Max) | 10Ohm |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 4.2ns, 5ns |
| Charge Injection | 7.5pC |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height Seated (Max) | 0.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC1G384GF,132 Overview
Shipping overseas is convenient due to the electrical component's packing in 6-XFDFN. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. There are 6 terminations totally. As a result of its 1 channels, this electronic component provides high-quality output. With a 2.7V voltage supply, the electrical component should be turned on and run. There are 6 pins injected into the electronic part body. On the other hand, analog switches can be constructed using SPST - NC switching circuits. If you are looking for variants of the digital switch, trying search with 74LVC1G384. It has an internal resistance of 15Ohm. To find out what the 6 pins do, please refer to the datasheets. Users should never supply a voltage higher than 5.5V to a switch device. A analog switch ic that has a cost-effective Single supply type. 1.65V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 200μA current. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. The analogue multiplexer may be damaged if voltage is greater than 200μA. The electronic component can function from 5V. The electrical component supports 1 inputs.
74LVC1G384GF,132 Features
1 Channels
Switch Circuit: SPST - NC
200μA Supply Current
-3db Bandwidth: 500MHz
74LVC1G384GF,132 Applications
There are a lot of Nexperia USA Inc. 74LVC1G384GF,132 Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- Medical
- Video switching
- Communication systems
- USB 1.1 signal switching circuits
- HDTV
- High-Voltage
- Frame Relay Equipment
- Audio signal routing
- Battery Powered Systems