74LVC1G3157GS,132
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 15Ohm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 250mW |
| Terminal Position | BOTTOM |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.35mm |
| Base Part Number | 74LVC1G3157 |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40μA |
| Power Dissipation | 250mW |
| Propagation Delay | 3 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 2 |
| Supply Type | Single |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 10Ohm |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 42 dB |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 4ns, 3.5ns |
| Charge Injection | 7.5pC |
| Switch-off Time-Max | 5ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Drain to Source Resistance | 195Ohm |
| Height Seated (Max) | 0.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
74LVC1G3157GS,132 Overview
Shipping overseas is convenient with the electronic component packed in 6-XFDFN. High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operation at a temperature around -40°C~125°C TA. In total, there have been 6 terminations. Due to its 2 channels, the electrical component produces high-quality output. An 2.7V voltage supply should allow the electrical part to be turned on and run. The analog switch ics are built using SPDT switching circuits. It consists of 1 circuits. Try searching for the analog switch ic with 74LVC1G3157 if you are looking for variants. As far as internal resistance is concerned, it has 15Ohm. Datasheets for functions of 6 pins are available. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 1.65V. For this digital switch to work, 40μA current would suffice. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. Among the inputs that can be operated are the 2 inputs. Drain to Source resistance for this electronic component is 195Ohm.
74LVC1G3157GS,132 Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
-3db Bandwidth: 300MHz
Drain-to-Source resistance: 195Ohm
74LVC1G3157GS,132 Applications
There are a lot of Nexperia USA Inc. 74LVC1G3157GS,132 Analog Switches & Multiplexers ICs applications.
- Medical systems
- Sample-and-hold systems
- Channelized and Unchannelized DS3 applications
- Voice over IP/DSL – Integrated Access Devices, Smart
- Routers
- Audio and video switching
- Multi-Line E1 Interface Cards
- Residential Gateways, Home Gateway/Router
- PDAs
- Digital cross connects (DSX-1)