74LV4066DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 40Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4066 |
| Pin Count | 14 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 80μA |
| Power Dissipation | 400mW |
| Max Supply Current | 80μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 40 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 50 ns |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 35Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 16ns, 28ns |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 1V~6V |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74LV4066DB,112 Overview
The electronic component is convenient to ship overseas because it is packed in a 14-SSOP (0.209, 5.30mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~125°C TA. The total number of terminations is 14. High-quality output is provided by the electronic component's 1 channels. With a 3.3V voltage supply, the electrical component should be turned on and run. This electronic part can be found in the 14 series. Multiplexers built on a SPST - NO switching circuit are built. Try searching with 74LV4066 if you're looking for variants. Internally, this switch multiplexer has a resistance of 40Ohm. For details about the functions of 14 pins, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. Analogue multiplexer with a Single supply type that is cost-effective. A low voltage of 1V should be applied to the electronic component. For this digital switch to work, 80μA current would suffice. An analogue multiplexer drains from a single voltage supply at 1V~6V. Put voltage above 80μA on the multiplexer to cause damage. 3.3V operating voltages are supported by the electronic component. A 4 input needs to be operated.
74LV4066DB,112 Features
1 Channels
Switch Circuit: SPST - NO
80μA Supply Current
-3db Bandwidth: 200MHz
74LV4066DB,112 Applications
There are a lot of Nexperia USA Inc. 74LV4066DB,112 Analog Switches & Multiplexers ICs applications.
- Isolation
- Sample-and-hold systems
- Routers
- Medical
- USB 1.1 signal switching circuits
- 65 V DACs
- SONET/SDH ADM
- High-Voltage
- SDH/SONET multiplexers
- Public switching systems