74HCT74D,653
| Parameters | |
|---|---|
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Voltage | 7V |
| Number of Circuits | 2 |
| Output Current | 2mA |
| Clock Frequency | 59MHz |
| Propagation Delay | 60 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop, Inverter |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 44ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 8 |
| Number of Output Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 4 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
74HCT74D,653 Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. D flip flop is included in the Tape & Reel (TR)package. Differentialis the output configured for it. It is configured with a trigger that uses Positive Edge. Surface Mountmounts this electrical part. A voltage of 4.5V~5.5Vis required for its operation. -40°C~125°C TAis the operating temperature. The type of this D latch is D-Type. In this case, it is a type of FPGA belonging to the 74HCT series. A frequency of 59MHzshould be the maximum output frequency. It consumes 40μA of quiescent current without being affected by external factors. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74HCT74 family contains this object. It is powered from a supply voltage of 5V. JK flip flop input capacitance is 3.5pF farads. It is a member of the HCTfamily of D flip flop. Surface Mount mounts this electronic component. A total of 14pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. To achieve this superior flexibility, 2 circuits are used. High efficiency requires the supply voltage to be maintained at 5V. This T flip flop features a maximum design flexibility due to its output current of 2mA. There are 4 output lines on it. It has 8lines. It consumes 80μA of quiescent current without being affected by external factors.
74HCT74D,653 Features
Tape & Reel (TR) package
74HCT series
14 pins
74HCT74D,653 Applications
There are a lot of Nexperia USA Inc. 74HCT74D,653 Flip Flops applications.
- Single Down Count-Control Line
- Frequency Dividers
- Matched Rise and Fall
- Set-reset capability
- Memory
- Dynamic threshold performance
- Bounce elimination switch
- Digital electronics systems
- Memory
- Shift registers