74HCT4852PW-Q100,1
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 210Ohm |
| Base Part Number | 74HCT4852 |
| Pin Count | 16 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2μA |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| On-State Resistance (Max) | 210Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 25ns, 80ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4852PW-Q100,1 Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~125°C TA. It is part of the design of the 16 series that this electronic component is included. A SP4T switching circuit is used for these analog switches. A 2 circuit is present in this switch device. Using the 74HCT4852 search parameter, you can discover variants of the switch. An switch multiplexer with 210Ohm internal resistance has a value of 210Ohm. You can find the functions of the 16 pins in the datasheets. A voltage higher than 5.5V should not normally be supplied to the switches. A cost-effective Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 4.5V. 2μA current would be enough for this multiplexer to operate. A voltage of 4.5V~5.5V is required for this switch device, which drains from a single voltage source. This is electronic component of the Automotive, AEC-Q100 series.
74HCT4852PW-Q100,1 Features
Switch Circuit: SP4T
2μA Supply Current
74HCT4852PW-Q100,1 Applications
There are a lot of Nexperia USA Inc. 74HCT4852PW-Q100,1 Analog Switches & Multiplexers ICs applications.
- Voice over IP/DSL – Integrated Access Devices, Smart
- DSLAMs
- Medical systems
- Video switching
- Industrial and process control systems
- Precision data acquisition
- Access Concentrators
- Relay replacements
- Ultrasound
- Multiplexers