74HC595N,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL/PALLADIUM/GOLD (NI/PD/AU) |
| Additional Feature | SERIAL STANDARD OUTPUT FOR CASCADING |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Family | HC/UH |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 265 ns |
| fmax-Min | 24 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 4.2mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HC595N,112 Overview
16-DIP (0.300, 7.62mm) package contains the device. Taking the total number of terminations on the chip and adding them up, we get 16. A Tube case is used to pack it. 5V is the part's operating supply voltage. The part consists of 1 elements. This electronic component is classified as HC/UH. There is a component mounted in the way of Through Hole on this board. A temperature range of -40°C~125°C is used for operation. It is supplied with voltage within 2V~6V. It is part of the 74HC series of electrical components. You can search for similar parts based on the 74HC595 family. There are also the following additional considerations in this section: SERIAL STANDARD OUTPUT FOR CASCADING. This part should have a minimum supply voltage (Vsup) of at least 2V. It can deliver voltage at 2/6V. A maximum supply voltage (Vsup) of 6V may be applied to this part.
74HC595N,112 Features
Mounted in Through Hole type.
Based on 74HC595 family
It supplies 2/6V power
74HC595N,112 Applications
There are a lot of NXP USA Inc. 74HC595N,112 Shift Registers applications.
- Pattern Recognizers
- Sequence generator
- Serial to parallel converter
- Dual-rank shift, hold, and bus applications
- Parallel data
- 7-segment display control
- data transfer
- Serial-to-parallel data conversion
- ROM Chips
- 8-bit data storage