74HC4094N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4094 |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Family | HC/UH |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 295 ns |
| fmax-Min | 24 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 24000000Hz |
| Height Seated (Max) | 4.2mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HC4094N,652 Overview
This device can be found embedded within the package 16-DIP (0.300, 7.62mm). There are 16 terminations on the chip. It is used to pack in Tube case. This part has an operating supply voltage of 5V. There are 1 elements on this part. There is an electronic component in the HC/UH. As you can see, this component is mounted in the way of Through Hole. A temperature range of -40°C~125°C is used for the operating environment. The voltage supplied to it is within the range of 2V~6V. This electrical component belongs to the 74HC series. By using the 74HC4094 family, you can find similar parts. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT. For this part, the minimum supply voltage (Vsup) should not be less than 2V. Voltage can be delivered at 2/6V by the device. This part requires a maximum supply voltage (Vsup) of 6V.
74HC4094N,652 Features
Mounted in Through Hole type.
Based on 74HC4094 family
It supplies 2/6V power
74HC4094N,652 Applications
There are a lot of NXP USA Inc. 74HC4094N,652 Shift Registers applications.
- Data manipulation
- Serial-to-parallel data conversion
- LED matrix control
- Dual-rank shift, hold, and bus applications
- Remote control holding register
- data manipulation
- Pattern Recognizers
- ROM Chips
- temporary data storage
- Sequence generator