74HC374DTR2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 225 ns |
| Turn On Delay Time | 21 ns |
| Family | HC/UH |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 21ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.0414mm |
| Length | 6.5786mm |
| Width | 4.4958mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74HC374DTR2G Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. As part of the package Tape & Reel (TR), it is embedded. Currently, the output is configured to use Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 2V~6V. The operating temperature is -55°C~125°C TA. D-Typedescribes this flip flop. FPGAs belonging to the 74HCseries contain this type of chip. This D flip flop should not have a frequency greater than 35MHz. The element count is 1 . There is a consumption of 4μAof quiescent energy. A total of 20terminations have been recorded. This D latch belongs to the family of 74HC374. A voltage of 3V is used as the power supply for this D latch. There is 10pF input capacitance for this T flip flop. An electronic device belonging to the family HC/UHcan be found here. There is an electronic component mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device has the clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. This flip flop is designed with 8 Bits. There is a 6Vmaximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be kept above 2V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The system runs on a power supply of 2/6V watts. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Featuring the maximum design flexibility, it has an output current of 7.8mA . The number of input lines is 8.
74HC374DTR2G Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies
74HC374DTR2G Applications
There are a lot of ON Semiconductor 74HC374DTR2G Flip Flops applications.
- Clock pulse
- Computers
- Data Synchronizers
- Convert a momentary switch to a toggle switch
- Buffered Clock
- Latch
- Matched Rise and Fall
- QML qualified product
- Counters
- Count Modes