74FCT163374APAG8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 100nA |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -8mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT163374APAG8 Overview
TSSOP is a package containing the embedded device. A total of 48 terminations can be found on the chip. There is 3.3V operating supply voltage listed on the part. It is a part that has 2 elements on it. There are 48 pins on the device. Surface Mount is recommended for mounting. This electronic component is classified as FCT. It is noted that the operating supply voltage of this chip falls within the range 3.3V. Please take note of the following additional aspects of this section: MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V. It has a total of 16 pins. There are a total of 48 pins on it. A temperature below 85°C is recommended for its use. Ideally, it should not fall below -40°C. A voltage of this type is employed under 3.6V. This supply voltage is employed higher than 2.7V. A quiescent current of 100nA is used. Its subcategory belongs to FF/Latches. In order to package the part properly, TAPE AND REEL is used.
74FCT163374APAG8 Features
With 48 pins
Operate supply voltage at 3.3V
Quiescent Current at 100nA
Packing Method : TAPE AND REEL
74FCT163374APAG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT163374APAG8 Shift Registers applications.
- Interconnectors
- Flash Memory
- Delay Line
- Dual-rank shift, hold, and bus applications
- Remote control holding register
- Data Format Converters
- Pattern Recognizers
- Cache memory in CPU
- Generate time delay toward digital circuits
- Parallel to serial converter