74F676SPC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | MATTE TIN |
| Additional Feature | HOLD MODE; CHIP SELECT DISABLES BOTH SERIAL & PARALLEL OPERATIONS |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| JESD-30 Code | R-PDIP-T24 |
| Function | Parallel or Serial to Serial |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Family | F/FAST |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 16 |
| Trigger Type | NEGATIVE EDGE |
| fmax-Min | 90 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74F676SPC Overview
There is a 24-DIP (0.300, 7.62mm) package embedded with the device. There are 24 terminations on the chip. Presented in a case of Tube. This part has an operating supply voltage of 5V. A total of 1 elements can be found on this part. Electronic components fall under the category of F/FAST. The component is positioned in the way of Through Hole. The operating temperature ranges 0°C~70°C. During operation, the voltage is within the range of 4.5V~5.5V. The 74F series represents this electrical component. There are also the following additional considerations in this section: HOLD MODE; CHIP SELECT DISABLES BOTH SERIAL & PARALLEL OPERATIONS. There should be no voltage less than 4.5V at the minimum supply voltage (Vsup). It is recommended that the maximum supply voltage for this part is not greater than 5.5V (Vsup).
74F676SPC Features
Mounted in Through Hole type.
74F676SPC Applications
There are a lot of Rochester Electronics, LLC 74F676SPC Shift Registers applications.
- LED matrix control
- Serial to parallel converter
- Data Format Converters
- Counter
- Remote control holding register
- Sequence generator
- store data in digital form
- 8-bit data storage
- Dual-rank shift, hold, and bus applications
- Delay Line