74F533PC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74F533 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 61mA |
| Number of Bits | 8 |
| Propagation Delay | 9 ns |
| Quiescent Current | 41mA |
| Turn On Delay Time | 6.7 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 3mA 24mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -3mA |
| Low Level Output Current | 3mA |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Delay Time - Propagation | 6.7ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F533PC Overview
In the 20-DIP (0.300, 7.62mm) package, it can be found as an embedded module. Tube is the packaging method. Tri-State is the output configured for it. There is a logic type of D-Type Transparent Latch associated with this electrical device. According to Through Hole, this electronic part is mounted. It operates with a supply voltage of 4.5V~5.5V. A temperature of 0°C~70°C is set as the operating temperature. In the 74F series, this FPGA is located. The design of this electronic part is based on 8 bits. This type belongs to the 74F533 family. The device has 20 pins. The electronic part is mounted using the Through Hole method. It consists of 2 input lines from which an electronic circuit can be built. For maximum efficiency, the supply voltage should be set to 5V. A binary equivalent of the input line is generated by the 8 output lines. It consumes 41mA current from its quiescent state without being affected by external factors at all. A total of 1 elements make up this object. Its superior flexibility is achieved by using 8 circuits. 3mA represents the low level output current. It is set to zero for the high level output current. A temperature below 70°C should be used for operation. It is recommended that the operating temperature be higher than 0°C. Voltages up to 5.5V can be supplied. In order for the machine to operate, the supply voltage must be 4.5V.
74F533PC Features
20-DIP (0.300, 7.62mm) package
74F series
8 Bits
74F533 family
20 pins
1 elements
74F533PC Applications
There are a lot of ON Semiconductor 74F533PC Latches applications.
- Watches
- Buffer/Storage Registers
- Decade counting
- Audio and video switching
- Synchronous frequency dividers
- Parallel data storage
- BCD counting
- Timers
- Counting
- Phase comparator