74AUP1G175GW-Q100H
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 1.1V |
| Base Part Number | 74AUP1G175 |
| Function | Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Bits | 1 |
| Clock Frequency | 300MHz |
| Propagation Delay | 21 ns |
| Family | AUP/ULP/V |
| Current - Quiescent (Iq) | 500nA |
| Current - Output High, Low | 4mA 4mA |
| Max Propagation Delay @ V, Max CL | 5.7ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 0.8pF |
| fmax-Min | 550 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AUP1G175GW-Q100H Overview
The package is in the form of 5-TSSOP, SC-70-5, SOT-353. It is included in the package Tape & Reel (TR). In the configuration, Non-Invertedis used as the output. There is a trigger configured with Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 0.8V~3.6V volts. It is at -40°C~125°C TAdegrees Celsius that the system is operating. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 74AUP series. A frequency of 300MHzshould be the maximum output frequency. D latch consists of 1 elements. There is a consumption of 500nAof quiescent energy. There have been 6 terminations. Members of the 74AUP1G175family make up this object. An input voltage of 1.1Vpowers the D latch. Input capacitance of this device is 0.8pF farads. It is a member of the AUP/ULP/Vfamily of D flip flop. The electronic part is mounted in the way of Surface Mount. This board has 6 pins. It has a clock edge trigger type of Positive Edge. The flip flop is designed with 1bits. The supply voltage (Vsup) should be maintained above 0.8V for normal operation.
74AUP1G175GW-Q100H Features
Tape & Reel (TR) package
74AUP series
6 pins
1 Bits
74AUP1G175GW-Q100H Applications
There are a lot of Nexperia USA Inc. 74AUP1G175GW-Q100H Flip Flops applications.
- EMI reduction circuitry
- Shift registers
- ESD protection
- Buffered Clock
- Storage Registers
- High Performance Logic for test systems
- Bus hold
- Functionally equivalent to the MC10/100EL29
- Test & Measurement
- Common Clocks