74ALVCH32374ZKER
| Parameters | |
|---|---|
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 32 |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.2 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 1 ns |
| Family | ALVC/VCX/A |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 4.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 150000000Hz |
| Height | 1.4mm |
| Length | 13.5mm |
| Width | 5.5mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | LIFEBUY (Last Updated: 1 week ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 96-LFBGA |
| Number of Pins | 96 |
| Weight | 166.610147mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 96 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74ALVCH32374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 4 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
74ALVCH32374ZKER Overview
It is packaged in the way of 96-LFBGA. The package Tape & Reel (TR)contains it. It is configured with Tri-State, Non-Invertedas an output. In the configuration of the trigger, Positive Edgeis used. Surface Mountis occupied by this electronic component. A voltage of 1.65V~3.6Vis used as the supply voltage. A temperature of -40°C~85°C TAis used in the operation. D-Typeis the type of this D latch. In terms of FPGAs, it belongs to the 74ALVCH series. A frequency of 150MHzshould be the maximum output frequency. In total, it contains 4 elements. There are 96 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74ALVCH32374 family contains it. The power source is powered by 1.8V. The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It is a member of the ALVC/VCX/Afamily of D flip flop. It is mounted in the way of Surface Mount. The 96pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. An electronic part with 32bits has been designed. Vsup reaches 3.6V, the maximal supply voltage. The supply voltage (Vsup) should be kept above 1.65V for normal operation. As a result of its reliable performance, this T flip flop is suitable for TR. It operates from 3.3V power supplies. The D flip flop is embedded with 2ports. There are 8 output lines in this JK flip flop. It consumes a total of 80μA quiescent current at any given time.
74ALVCH32374ZKER Features
Tape & Reel (TR) package
74ALVCH series
96 pins
32 Bits
3.3V power supplies
74ALVCH32374ZKER Applications
There are a lot of Texas Instruments 74ALVCH32374ZKER Flip Flops applications.
- Instrumentation
- ESD performance
- Single Up Count-Control Line
- Balanced 24 mA output drivers
- Individual Asynchronous Resets
- Circuit Design
- Data Synchronizers
- Balanced Propagation Delays
- Communications
- Frequency Divider circuits