74ACT273MTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e3/e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN/NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 190MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 4 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
74ACT273MTR Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. There is an embedded version in the package Tape & Reel (TR). Non-Invertedis the output configured for it. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. A temperature of -55°C~125°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74ACTseries contain this type of chip. There should be no greater frequency than 190MHzon its output. A total of 1 elements are present. During its operation, it consumes 4μA quiescent energy. 20terminations have occurred. The object belongs to the 74ACT273 family. A voltage of 5V provides power to the D latch. Input capacitance of this device is 4pF farads. ACTis the family of this D flip flop. There is an electronic part that is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. The RS flip flops belongs to FF/Latches base part number. An electronic part with 8bits has been designed. In order to achieve its superior flexibility, 8 circuits are used. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. A total of 5V power supplies are needed to run it. If high efficiency is desired, the supply voltage should be kept at 5V.
74ACT273MTR Features
Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies
74ACT273MTR Applications
There are a lot of STMicroelectronics 74ACT273MTR Flip Flops applications.
- Event Detectors
- Divide a clock signal by 2 or 4
- Patented noise
- Modulo – n – counter
- Asynchronous counter
- Frequency division
- Convert a momentary switch to a toggle switch
- Storage registers
- Bounce elimination switch
- Balanced Propagation Delays