74ABT823DB,112
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2014 |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT823 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 200MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 9 |
| Max Propagation Delay @ V, Max CL | 6.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 6.8 ns |
| Power Supply Current-Max (ICC) | 34mA |
| Height Seated (Max) | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74ABT823DB,112 Overview
The flip flop is packaged in a case of 24-SSOP (0.209, 5.30mm Width). It is contained within the Tubepackage. There is a Tri-State, Non-Invertedoutput configured with it. The trigger configured with it uses Positive Edge. Surface Mountis positioned in the way of this electronic part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 74ABT series. Its output frequency should not exceed 200MHz Hz. In total, there are 1 elements. This process consumes 250μA quiescents. It has been determined that there have been 24 terminations. It is a member of the 74ABT823 family. An input voltage of 5Vpowers the D latch. JK flip flop input capacitance is 4pF farads. The electronic device belongs to the ABTfamily. The part you are looking for is included in FF/Latches. The maximal supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be above 4.5V. There are 5V power supplies attached to it. There are 2 ports embedded in the flip flops. There is also a characteristic of WITH CLEAR AND CLOCK ENABLE.
74ABT823DB,112 Features
Tube package
74ABT series
5V power supplies
74ABT823DB,112 Applications
There are a lot of NXP USA Inc. 74ABT823DB,112 Flip Flops applications.
- Asynchronous counter
- Circuit Design
- Count Modes
- Computers
- Test & Measurement
- QML qualified product
- Latch
- Differential Individual
- Instrumentation
- Clock pulse