74ABT821PW,118
| Parameters | |
|---|---|
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION; WITH POWER-UP RESET |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT821 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 185MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 6.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 6.7 ns |
| Power Supply Current-Max (ICC) | 38mA |
| Length | 7.8mm |
74ABT821PW,118 Overview
In the form of 24-TSSOP (0.173, 4.40mm Width), it has been packaged. There is an embedded version in the package Tape & Reel (TR). Tri-State, Non-Invertedis the output configured for it. JK flip flop uses Positive Edgeas the trigger. Surface Mountis in the way of this electric part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. Currently, the operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74ABT series. There should be no greater frequency than 185MHzon its output. In total, it contains 1 elements. It consumes 250μA of quiescent current without being affected by external factors. It has been determined that there have been 24 terminations. It is a member of the 74ABT821 family. A voltage of 5V is used to power it. Its input capacitance is 4pFfarads. Devices in the ABTfamily are electronic devices. This device is part of the FF/Latchesbase part number family. The maximal supply voltage (Vsup) reaches 5.5V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. It operates from 5V power supplies. This flip flop has a total of 2ports. It is also characterized by POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION; WITH POWER-UP RESET.
74ABT821PW,118 Features
Tape & Reel (TR) package
74ABT series
5V power supplies
74ABT821PW,118 Applications
There are a lot of NXP USA Inc. 74ABT821PW,118 Flip Flops applications.
- Dynamic threshold performance
- Load Control
- Divide a clock signal by 2 or 4
- Data storage
- Power down protection
- Guaranteed simultaneous switching noise level
- Buffer registers
- Counters
- CMOS Process
- Frequency Dividers