74ABT374ADB,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT374 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 300MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.9ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 5.2 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 5.2 ns |
| Power Supply Current-Max (ICC) | 30mA |
| Max Frequency@Nom-Sup | 200000000Hz |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74ABT374ADB,118 Overview
20-SSOP (0.209, 5.30mm Width)is the way it is packaged. It is contained within the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas its output configuration. It is configured with the trigger Positive Edge. Surface Mountis in the way of this electric part. A 4.5V~5.5Vsupply voltage is required for it to operate. A temperature of -40°C~85°C TAis considered to be the operating temperature. It is an electronic flip flop with the type D-Type. It belongs to the 74ABTseries of FPGAs. It should not exceed 300MHzin its output frequency. In total, there are 1 elements. There is a consumption of 250μAof quiescent energy. The number of terminations is 20. JK flip flop belongs to 74ABT374 family. It is powered from a supply voltage of 5V. There is 4pF input capacitance for this T flip flop. It is a member of the ABTfamily of D flip flop. This device has the base part number FF/Latches. The maximal supply voltage (Vsup) reaches 5.5V. The supply voltage (Vsup) should be maintained above 4.5V for normal operation. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. A D flip flop with 2embedded ports is available.
74ABT374ADB,118 Features
Tape & Reel (TR) package
74ABT series
5V power supplies
74ABT374ADB,118 Applications
There are a lot of NXP USA Inc. 74ABT374ADB,118 Flip Flops applications.
- Bus hold
- Computing
- Storage registers
- Safety Clamp
- ESD protection
- Balanced 24 mA output drivers
- Communications
- Load Control
- Data Synchronizers
- Latch-up performance