74ABT273AN,112
| Parameters | |
|---|---|
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT273 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 350MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 30mA |
| fmax-Min | 250 MHz |
| Max Frequency@Nom-Sup | 250000000Hz |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
74ABT273AN,112 Overview
In the form of 20-DIP (0.300, 7.62mm), it has been packaged. There is an embedded version in the package Tube. Non-Invertedis the output configured for it. The trigger it is configured with uses Positive Edge. There is an electric part mounted in the way of Through Hole. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74ABT series. A frequency of 350MHzshould be the maximum output frequency. In total, it contains 1 elements. Despite external influences, it consumes 250μAof quiescent current. It has been determined that there have been 20 terminations. The 74ABT273 family contains it. An input voltage of 5Vpowers the D latch. Its input capacitance is 3.5pFfarads. Devices in the ABTfamily are electronic devices. There is a base part number FF/Latchesfor the RS flip flops. Vsup reaches its maximum value at 5.5V. For normal operation, the supply voltage (Vsup) should be above 4.5V. The D latch operates on 5V volts.
74ABT273AN,112 Features
Tube package
74ABT series
5V power supplies
74ABT273AN,112 Applications
There are a lot of NXP USA Inc. 74ABT273AN,112 Flip Flops applications.
- Clock pulse
- Communications
- Asynchronous counter
- ESCC
- Frequency Dividers
- High Performance Logic for test systems
- Bus hold
- Divide a clock signal by 2 or 4
- Balanced 24 mA output drivers
- Latch