72V275L10TF
| Parameters | |
|---|---|
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 32KX18 |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER-DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
72V275L10TF Overview
You can find FIFO memory chip in package LQFP .Mounting it Surface Mount is recommended.If the supply voltage is set to 3.3V , high efficiency can be achieved.As a result of this, FIFO means contains 64 terminations.There are 64 pins on the operation pins.In order for FIFO design to operate, a maximum current of 60mA is required.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.It is contained within FIFOs .There is a memory type OTHER FIFO in the IC of this part.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 3.6V V.The FIFO memory IC has a total of 64 pins.With a frequency of 100MHz , it exhibits good accuracy.Regular operation has a FIFO memory's maximum value of 100MHz .It is also possible to generate RETRANSMIT; AUTO POWER-DOWN with the use of this FIFO memory.
72V275L10TF Features
FIFOs category
Frequency at most
72V275L10TF Applications
There are a lot of Integrated Device Technology (IDT) 72V275L10TF FIFOs Memory applications.
- Data-acquisition systems
- Extended product life cycle
- General Data Collection Applications at Extreme High-Temperatures
- Video
- Portable Information Devices
- Disk Controllers
- Data communications
- Network switching/routing
- Controlled baseline
- Firmware loaders